Senlac Lifts - Vertical Lifts - Inclined Lifts

ELECTRIC SYSTEM	Made according to UNI EN 60204 rule. The electrical control box is a IP 54 protected type and it is connected to the hydraulic power pack with 2 m-long cables.
INSTALLATION	The lift is suitable for internal and external use. For external models the power pack and the electrical panel are to be placed inside. In case of temperature below -10° C, it is necessary to equip the hydraulic power pack with fluid heating system closed in a box. For external installations, a roof on the shaft must be fitted. The hydraulic hose connects to the base of the rails and is supplied in a 3 m length as standard (if required, up to 6 m max).
COLOUR	Red cabin (if required, light grey or light green, white, bordeaux, blue-aviation). Black doors, shafts and self-supporting structures (if required, silver - RAL 7004 - RAL 1013).
RAIL	Machined T70 rails.
FASTENINGS	With pre-drilled wall anchor brackets. If required on the back wall with mechanical or chemical screw anchors or with accurately positioned vertical I-beams; or with self supporting shaft.
VOLTAGE	230 V single phase. (50 Hz)
AVERAGE SPEED	0,10 - 0.15 m per second.
SAFE WORKING LOAD	300 Kg
TRAVEL	13.1m
HEAD ROOM	2400 mm. min. (2700 mm. min. for direct thrust and max. travel of 2300 mm.)
INTERMEDIATE STOPS	Max 2 (min. distance between 2 intermediate stops 160 mm.)
CONTROLS	Push buttons, constant pressure type, dimensions 25x25 mm.( if requested 50x50 mm.); on board raised up/down buttons; call-send floor controls; the board controls are equipped with removable key; on request the floor ones ; the floor controls are equipped with displays indicating cabin free/occupied; all the controls will only operate if the floor doors are closed and if they are provided with Braille codes; the floor controls can be at distance.
AUXILIARY CIRCUIT	24 V DC
ELECTRIC SAFETY	Emergency STOP button on board and in the pit ; thermal overload on the motor; floor terminal switch; final limit safety micro switch, to protect against slack or broken cables; individually fed power supply and auxiliary circuits; mechanical lock homologated according to EEC Directive 84/529 - 86/312 provided with door safety micro switch; automatic levelling at landings even with doors open; on board emergency descent in case of power failure; on board emergency light; sound alarm with 24 V dc power supply; floor position display (on the electrical panel); wiring for optional intercom; cabin light timer, descent timer. If required, intercom, distance sound alarm, phone-dialer.
MECHANICAL SAFETY	Twin lifting cables with spring mechanism for load balancing; safety gear break (homologated according to CEE 84/529 and 86/312 standards) acting on the rails; shaft complete with doors; emergency door release from outside, by proper tool; artificial 1 m pit.
HYDRAULIC SAFETY	Descent speed check valve; rupture valve fitted on cylinder; non-return valve; pressure relief valve on the hydraulic circuit; manual emergency descent valve; manual pump and pressure switch.
DOORS	Door with aluminium frame and anti-crashing glasses or semiautomatic door with panel and central window. Dimensions with standard platform, 2000x600 mm. or 2000x700 mm. or 200x750 mm. or 2000x800 mm. or 2000x860 mm; if required, door opener; always if required, door lock kits can be supplied separately.
SHAFT	To complement existing walls; full height at bottom level; min. 2400 mm high above top level; on request roof for indoor - or outdoor units.
PIT	120 mm (or, if required: ramp).
CABIN HEIGHT	2000 mm.
TRANSMISSION	Double acting single stage hydraulic cylinder and twin cable (or direct thrust till 2300 mm. of travel)
MOTOR	Two pole, single phase, 1,5 Kw, located in the hydraulic power pack.
CABIN	Including: red laminated panel on the rail side, ceiling with roof light and anti-slip platform surface. Standard dimensions 1400x110 0mm.; 1100x1400 mm.; 1250x1000 mm., 1000x1250 mm., 1250x1250 mm.,1250x850 mm. and 850 x 1250 mm. 970x770 mm.;770x970 mm.;900x850 mm. 850x90 0mm.;; if required also other dimensions, as long as the surface area is 1,55 m² max. N.B.: max. length of platform 1400 mm. The platform can be provided with enclosed cabin on 2 or 3 sides (with the same overall dimensions the platform sizes are reduced by 40 mm). On request halogen spots and mirror.
STANDARD FINISH	- In kit form. - for self-supporting structure: structural steel and laminated glass or plastic rolled sections.
AT CUSTOMER'S EXPENSE	Any modification of the site must be carried out at customer's expense, (before the delivery of the equipment and according to the manufactures' instructions), together with the provision of a dedicated power supply up to our board; cables size min. 2,5 mm² with magneto thermal R.C.C.D. switch 10A and sensitivity 0,03 A, with earthing by a cable min. 2,5 mm². Also at customer's expense is the provision of a power supply separated from the above mentioned one, cables size min. 2,5 mm², with magneto thermal R.C.C.D. switch 16A and sensitivity 0,03 A, with earthing by a cable min. 2,5 mm². This line will have to be equipped with one or more 16 A plugs for maintenance, at least one of these, placed in the artificial pit. The customer is liable for the strength of the supporting walls, floors balconies and plinths.

The data is indicative and not binding.

Sandringham	Vertical lifting system for disabled and aged persons

	EQUIPMENT	EUROPA	TÜV approval for the safety gear Lock kit homologation by IMQ according to Standard DM 89/236 and DPR 96/503 in conformity with the European Directive 73/23 "Low Voltage" in conformity with the European Directive 89/336 - EMC in conformity with the European Directive 98/37 Machinery Directive (conformity certification issued by IMQ)